Extra High Flow Series Multistage

High Flow, Water Pump XAMO MO HFExtra high flow water pump for commercial and industrial use. Also suitable for domestic boosting, rainwater harvesting, surface irrigation, tank transfer.

Pumped liquid: Clean cold water without abrasives or solids.

Self priming high flow rate multi stage centrifugal jet pump, single or 3 phase. For submerged, underground or surface mounting. Main flanges in brass for extra longevity and durability against heat/frost.

Automatic version includes pressure control, anti-blocking system, leak detection, and dry run protection with automatic restart.

Available with 1.2hp, 1.5hp and 2hp motors.

Water cooled, multi stage impeller/diffuser with venturi. Supplied with 10m cable.

Note: These high flow powerful pumps require installation on a single spur MCB protected. You are strongly advised to consult or have the pump installed by a professional electrician. For the avoidance of doubt a 13A plug is not sufficient. You MUST consult the Manual and if in any doubt consult a professional trained Electrician.

Materials X-AMO MO HF Pump Performance Charts

  • Pump Body – Stainless 304
  • Motor Body – Stainless 304
  • Rotor Shaft – Stainless 420
  • Supporting Flanges – Brass
  • Impellers – Noryl
  • Diffusers and Venturi – Noryl
  • Electrical cover – Polypropylene
  • Mechanical Seal – Ceramic/Graphite
  • Other Seals – NBR70


X-AMO and X-MO HF Series pumps Datasheet (193KB pdf opens in a new window).

Automatic Multistage Pump – Extra High Flow

Product Code Power Buy Now
XAMO1204HF 1.2HP
XAMO1505HF 1.5HP

Manual Multistage Pump – Extra High Flow

Product Code Power Buy Now
XMO1204HF 1.2HP
XMO150HF 1.5HP

Three Phase Manual Multistage Pump – Extra High Flow

Product Code Power Volts Buy Now
XMO1204BTHF230 1.2HP 230V
XMO1204BTHF400 1.2HP 400V
XMO1505BTHF230 1.5HP 230V
XMO1505BTHF400 1.5HP 400V
XMO2006TFH230 2HP 230V
XMO2006TFH400 2HP 400V