Extra High Flow Series Vertical Multistage

Extra high flow water pump for commercial and industrial use. Also suitable for domestic boosting, rainwater harvesting, surface irrigation, tank transfer.

Pumped liquid: Clean cold water without abrasives or solids.

Self priming high flow rate multi stage centrifugal jet pump, single or 3 phase. For submerged, underground or surface mounting. Main flanges in brass for extra longevity and durability against heat/frost.

Automatic version includes pressure control, anti-blocking system, leak detection, and dry run protection with automatic restart.

Available with  1.2hp, 1.5hp and 2hp motors.

Water cooled, multi stage impeller/diffuser with venturi. Supplied with 10m cable.

Note: the X-MV150HF and Extra High Flow Single Phase pumps in this series require installation on a single spur MCB protected. You are strongly advised to consult or have the pump installed by a professional electrician. For the avoidance of doubt a 13A plug is not sufficient. You MUST consult the Manual and if in any doubt consult a professional trained Electrician.

Materials 

• Pump Body – Stainless 304
• Motor Body – Stainless 304
• Rotor Shaft – Stainless 420
• Supporting Flanges – Brass
• Impellers – Noryl
• Diffusers and Venturi – Noryl
• Electrical cover – Stainless 304
• Mechanical Seal – Ceramic/Graphite
• Other Seals – NBR70

Datasheets

X-AMV and X-MV HF Series pumps datasheet (167KB pdf opens in a new window).

X-MV150 HF Series pumps datasheet (183KB pdf opens in a new window).

Extra High Flow Series Automatic Vertical Multistage Pump

Extra High Flow  Series Manual Vertical Multistage Pump

Extra High Flow Series Three Phase Manual Vertical Multistage Pump