Check the suction and discharge pipes for obstructions. Also check the function of the Non-Return Valve.
The Non Return Valve is a black plastic cylinder which should be connected directly to the pump's inlet (not at the end of a hose). It can be checked for blockage by pushing a finger into the inlet end, the valve plate should move with minimal resistance.
This troubleshooting guide is primarily intended for technicians and competent persons only for resolving problems with the SteelPumps range. If you do not understand any of the terms within the guide or get stuck please send an email with photographs of your installation to sales@steelpumps.co.uk. You can also contact us for advice on 01239 623506, but please be aware that we may have to call you back when an Engineer is available.
Important warranty information
Your two year Warranty is not valid if the pump has been disassembled in any way.

The Warranty does not cover malfunctioning due to a failure to properly install or commission the pump in accordance with the installation instructions. Correct installation is particularly vital in the case of automatic pumps which will run excessively if the pressure drops in the delivery network.

How to initiate a warranty claim.