BPM Series Pressure Boosting Sets

£2,831.32£3,183.64 ex VAT

3P BPM series pressure booster sets are designed to supply water under pressure to multiple points of use.
For other Models or specific features please contact us



3P BPM series pressure booster sets are designed to supply water under pressure to multiple points of use.

Multi-Point Pressure Control manages both the start and stop pressure of each pump, achieving high efficiency without the increased cost of variable speed sets, but with enhanced reliability, reduced component count, and lower cost. Pressure is measured at the outlet manifold by an electronic pressure sensor with greater reliability than mechanical switches.

Features include adjustable pressure, duty standby/assist with alternation at each pump cycle, and BMS output, whilst remaining extremely compact. Pressure control is achieved by modulation of the pumps which are run as required to maintain pressure within a specified range.

An optional level sensor probe can be situated in a break tank or Well and indicates the current water level, as well as providing an adjustable safety shut-off water level which can be adjusted from the control panel.

BPM Series booster sets are controlled by the 3P Technik P Series Controller.


Product CodePumpsMax Pressure (bar)Max Flow (l/min)Noise Level at 1m (approx)Supply Tank MonitoriingVoltageCurrent
BPM12022 x XMO120PRO5.318060dbFloat~1 230Vac14.4
BPM120422 x XMO1204BHF4.329060dbFloat~1 230Vac12.8
BPM150522 x XMO1505BHF5.229060dbFloat~1 230Vac14.6
BPM200622 x XMO2006HF6.318060dbFloat~1 230Vac20.2
BPM1202L2 x XMO12PRO5.318060dbPressure Transmitter~1 230Vac14.4
BPM12042L2 x XMO1204BHF4.329060dbPressure Transmitter~1 230Vac12.8
BPM15052L2 x XMO1505BHF5.229060dbPressure Transmitter~1 230Vac14.6
BPM20062L2 x XMO2006HF6.318060dbPressure Transmitter~1 230Vac20.2
BPM120232 x XMO120PRO5.318060dbFloat~3 400Vac5
BPM1204232 x XMO1204BHF4.329060dbFloat~3 400Vac4.4
BPM1505232 x XMO1505BHF5.229060dbFloat~3 400Vac5
BPM2006232 x XMO2006HF6.318060dbFloat~3 400Vac6
BPM1202L32 x XMO120PRO5.318060dbPressure Transmitter~3 400Vac5
BPM12042L32 x XMO1204BHF4.329060dbPressure Transmitter~3 400Vac4.4
BPM15052L32 x XMO1505BHF5.229060dbPressure Transmitter~3 400Vac5
BPM20062L32 x XMO2006HF6.318060dbPressure Transmitter~3 400Vac6


  • Adjustable pressure control
  • Duty Standby/Duty Assist with alternation
  • Quiet water cooled pumps fixed on anti-vibration mounts for extremely quiet operation
  • Single sided bolt removal (no need to reach backnut on other side)
  • Integral lifting point for ease of installation
  • Twin pressure vessels
  • Highly Accurate Digital Pressure Display
  • Break Tank Level Display (optional)
  • Control Panel Failover to Automatic pumps (optional)
  • Adjustable viewing angle Control Panel
  • Modular ‘hot swap’ of pumps and solenoids
  • Lockable isolator switch
  • Automatic Tank Level Calibration
  • Multiple pump model support at 230Vac 50Hz or any supply voltage/phase via contactors/overloads
  • BMS Switched output
  • Optional BMS serial output
  • Advanced Fault Tracking
  • Fault Warning LED
  • Auto hunt for redundant spare pump during pump failure in single pump mode
  • Swappable MCU chip (software)
  • System Overpressure Alarm – protects pipework and attached appliances (UV system, etc) from overpressure due to faulty installation or incorrect pressure setting
  • Overvoltage protection
  • Automatic pump test / anti-blocking cycle
  • Brownout protection
  • Watchdog timer
  • Fused Outputs

Adjustable Settings

  • Pump cut-in/cut-out pressure (for each pump)
  • System Overpressure Alarm
  • Pump failure pressure
  • Pump Mode (Pump 1, Pump 2, Twin pump assist/standby)
  • Minimum Water Level (dry run prevention)
  • Pump restart delay
  • Fault code display
  • Fault code erase
  • Input test diagnostic screen
  • Output test diagnostic screen
  • Manual Stop – with BMS activation
  • Restore Factory Default Settings


Additional information

Weight88 kg
Dimensions1050 × 600 × 1500 mm

BPM1202, BPM12023, BPM20062, BPM200623

Material - Pump Body

Stainless 304

Material - Impellers

Stainless 304

Material - Diffusers


Material - Venturi


Material - Pump Shafts

Stainless 420

Material - Shaft Seals


Material - Body Seals

NBR 70

Supply Voltage


Power Consumption


Overvoltage/Surge Protection

Metal Oxide Varistor, fused
crowbar circuit 275V

Electronic Circuit Protection

Fused 125mA mains side,
500mA DC side

Pump Output Protection

Individually Fused 10A,
replaceable cartridge fuse, 1
per output.

Fuse Type

20x5mm Ceramic
Cartridge, High Rupture
Current (1250A)

Sound Level - Both Pumps Operating

Approx 60 db @1m


LCD 4 x 20






Volt-free contact

BMS (optional)

RS-232 Serial

Pressure Control

Multi-point pressure control via closed loop fixed speed duty cycling

Pressure adjustment

Digital via control panel

Duty Standby

Yes, with alternation per startup

Duty Assist


Fault detection


Fault History Log

10 faults

Pressure Sensing

Electronic, solid state, absolute 0-10bar 420mA, Replaceable.

Level Sensing (BPM)

Mechanical float switch

Level Sensing (BPM L)

Submersible electronic pressure sensor, solid state, relative 0-6 metres, with vented cable.

perating Temp Range

0 – 40ºC

Protection Class - Pumps

IP68 (submersible)

Protection Class Controls

IP65 (IP68 available on request)

OEM Solutions

3P Pump Sets are supplied either as a complete unit, individual component parts, or as a kit (add your own pumps).
We work with our customers to provide specific product bundles, with panel and software branded to your requirements.
We provide full training, design and technical support, and will customise the product and accessories to your requirements, and full UK based support and spare parts availability.